Dit is een test-site

Winkelwagen

  • Winkelwagen is leeg!

Merken

curve_type_3_left_tcurve_type_3_right_t
Ir Control 10 Xtra

Ir Control 10 Xtra

€102,58  (+0,05)
Referentie: MMT08140
Taal: UK

Uitgebreide beschrijving

Inleiding

MARMITEK IR CONTROL 10 XTRA

Specifications

Main Features:

 

  • Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
  • With the IR Control 10 XTRA you can operate 2 compartments/cupboard sections and 2 extra pieces of equipment.
  • With the exception of the very small IR receiver, the complete set can be located completely out of sight.
  • With IR blaster function for operating numerous devices with one IR blaster or if you prefer not to stick IR LEDs onto your A/V equipment.
  • Works with almost all brands and models and is also suitable for new IR code formats (such as RC-MM) which are used in many new HD devices and digital TV decoders.
  • Incorporates new IR filter techniques for use in the vicinity of Flat Screen TVs (Plasma, LCD and LED), indirect sunlight and energy-efficient light bulbs.

How does the IR Control 10 XTRA work?


Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room. The IR receiver must be installed in view of your own remote control. Stick the IR blaster LED wherever you want in the cabinet and conceals the IR main module neatly. Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

 

IR Receiver

 

Frequency Range 30-60KHz
IR Reception Range +- 10m
IR Reception Angle

90° (+45°/-45° from center)

Cable length

3m

IR Modules

 

Power Supply

100-240VAC 50/60Hz, 12VDC 200mA

Status

5-24VDC / 5-12VAC plug, 5,5mm outside / + 2.1mm inside

IR Input

1x 3,5mm jack connector, for standard IR Reciever
1x Screw Connector, for up to 6 in parallel connected IR Receivers
Extentables up to 300m using Cat.5

IR Output 4x 3,5mm jack plug (mono), switchable for IR extension cables with emitter or blaster LED
Dimensions 95x46x20mm

IR Extension Cable 
With 1 Blaster LED

 

Connection 3,5mm jack plug (mono)
IR LEDS

1x IR blaster LED

Cable length 3m

IR Extension Cable 
With 2 emitter LED

 

Connection 3,5mm jack plug (mono)
IR LEDS

2x IR emitter LED

Cable length 3m