Dit is een test-site

Winkelwagen

  • Winkelwagen is leeg!

Merken

curve_type_3_left_tcurve_type_3_right_t
100mbps Ethernet To Vsdl2 Bridge 30a (vc234)

100mbps Ethernet To Vsdl2 Bridge 30a (vc234)

€128,27  (+0,05)
Referentie: VC234
Taal: UK

Uitgebreide beschrijving

Inleiding

PLANET 100MBPS ETHERNET (4-PORT LAN) TO VSDL2 BRIDGE 30A

Specifications

Model: Planet VC-234

 

Ethernet over VDSL2 Converter (1 x RJ45, 1 x VDSL2/RJ11,17a/30a)

 

Ethernet Distance Extension

Two VC-234 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. The telephone service can still be used while the VC-234 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Bridge.

  

MTU / MDU / Hospitality Solution

The VC-234 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided.

 

Last Mile of FTTx Deployment

The VC-234 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the last mile from the ISP / Telecom / Service providers fiber node to the buildings and customers' houses. The 10/100Mbps ports of the VC-234 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.

 

Features

  • Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
  • One box design, CO / CPE selectable via DIP Switch
  • Defines symmetric band plan for the transmission of upstream and downstream signals
  • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards
  • DMT (Discrete Multi-Tone) line coding
  • Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
  • Built-in POTS splitter to share voice and data
  • Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for POST connection
  • Voice and data communication can be shared simultaneously based on the existing telephone wire
  • Four 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X
  • Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
  • Hardware IGMP Snooping for Multimedia service
  • VDSL2 stand-alone transceiver for simple bridge modem application
  • Advantage of minimum installation time (Simply as Plug-and-Play)
  • Selectable target profile and target SNR margin
  • Supports extensive LED indicators for network diagnosis
Specifications
Ports 10/100Base-TX 4 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
VDSL1 RJ-11, female Phone Jack
PHONE1 RJ-11, Built-in splitters for POTS connection
DIP Switch 4 position DIP switch
Functionality  CO / CPE mode select
Selectable fast and interleaved mode
Selectable target 17a / 30a profiles
Selectable target SNR mode
Encoding VDSL-DMT
- ITU-T G.993.1 VDSL
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
LED Indicators One Power
4 for RJ-11/VDSL2
1 for per RJ-45 10/100Base-TX port
Cabling Ethernet
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
VDSL
Twisted-pair telephone wires (AWG24 or better) up to 1.4km
Performance* (Downstream / Upstream) 17a profile 
300m -> 99/70Mbps 
400m -> 99/60Mbps
600m -> 90/45Mbps
800m -> 50/28Mbps 
1000m -> 40/12Mbps
1200m -> 20/7Mbps 
1400m -> 20/4Mbps

30a profile 
300m -> 100/100Mbps 
400m -> 90/90Mbps
600m -> 69/55Mbps
800m -> 48/9Mbps
Power Requirements 5V DC, 2A
Power Consumption 7.2 Watts/ 24 BTU
Dimensions (W x D x H) 155 x 86 x 26 mm
Weight 368g
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 10 ~ 90% (non-condensing)
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x Pause Frame for full duplex
Switch fabric 0.8Gbps
Throughput (packet per second) 0.59Mpps
Network cables 10/100Base-TX:
2-Pair UTP Cat. 3,4, 5 (100meters, max.) 
EIA / TIA-568 100-ohm STP (100meters, max.)
Standard Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
ITU-T
- G.993.1 (VDSL)
- G.997.1
- G.993.2 VDSL2 (Profile 17a/30a)
* The actual data rate will vary on the quality of the copper wire and environment factors.