Dit is een test-site

Winkelwagen

  • Winkelwagen is leeg!

Merken

curve_type_3_left_tcurve_type_3_right_t
600mbps 802.11n Dual Band Outdoor WLAN Cpe Ap With I)

600mbps 802.11n Dual Band Outdoor WLAN Cpe Ap With I)

€588,28  (+0,05)
Referentie: WDAP8350
Taal: UK

Uitgebreide beschrijving

Inleiding

PLANET 600MBPS 802.11N DUAL BAND OUTDOOR WLAN CPE AP WITH I)

Specifications

Powerful Dual-Band Outdoor WLAN Solution
PLANET WDAP-8350 comes with a high transmission power of 500mW which can bridge two remote nodes in the 5GHz frequency band and provides clients with 2.4GHz wireless access over longer distance range. Its fully-protected hardware design makes it capable to ward off direct lightning strikes and unpredictable harsh weathers. Furthermore, the WDAP-8350 adopts the high-class Qualcomm Atheros SoC (System-on-a-Chip) and Dual-OS Backup mechanism that provide higher stability to meet the stringent requirements of outdoor solution.
 
 
More Flexible for Outdoor Environments

With its dual-RF design and by connecting optional specific types and higher gain antennas to its N-Type antenna connectors, the WDAP-8350 can adapt to various applications including connecting IP cameras at multiple locations to the security control center to deploy a surveillance system, or relaying the wireless signal from the urban to the suburban to provide wireless internet service to rural residents simultaneously. With the WDAP-8350, an outdoor wireless infrastructure can be speedily deployed, thus realizing the setting up of an outdoor, long-distance, dual-purpose unit.
 
All-Weather Rugged Protection

With the IP66-rated aluminum housing, Surge Arrester, Heater design and wide-ranging operating temperature from -40 to 70 degrees C, PLANET WDAP-8350 can perform normally under rigorous weather conditions, including thunderstorms, and hot and cold climates, thus maintaining the connection as stable as that in the general environments.
 
Seamless Failover and Roaming
In the actual user experience, a redundant setup is important in that,the WDAP-8350 enables the auto failover mechanism to activate by using dual images (Dual-OS) while if the active OS fails, it can immediately switch to the standby OS. That can eliminate the difficulty of real-time support in long distance and make failover as simple as possible. Furthermore, it enhances handover of clients between APs by improving the handshaking process to promote better performance, thus reducing the handoff times between APs and associated clients, which means it can quickly handover to the nearby AP without any disconnection. Benefiting from the auto-backup and fast roaming, the WDAP-8350 is able to achieve a non-disruptive path failover and seamless roaming.
 
High-efficiency and Practical Solution to Separate Various Applications

PLANET WDAP-8350 supports multiple SSIDs (16 sets of SSIDs for each band) to allow each virtual wireless network to have a different set of security and also is capable to map each VAP to a specific virtual network through the use of VLAN tagging which enables isolation of guest and corporate networks. In addition, its dynamic rate adaptation mechanism for multicast guarantees the wireless bandwidth and service quality or the fixed rate of video streaming, which prevents from capacity wasting of multicast packets, thus utilizing the available bandwidth with more efficiency.
 
Advanced Value-added Characteristics
Featuring an IPv4/IPv6 dual-stack network, the WDAP-8350 can work with the original IPv4 network structure and also support the cutting-edge IPv6 network, which provides migration from the IPv4 to IPv6 network with ease. With the dynamic power saving mode implementation, it is capable to detect the traffic loading, which consumes low standby power automatically, thus reducing power consumption by less than 30%.
 
Easy Deployment and Management
Compliant with IEEE 802.3at PoE+ (Power over Ethernet) standard, the WDAP-8350 can be powered by a single UTP cable besides providing data transmission. It thus reduces the needs of extra cables and dedicated electrical outlets which are difficult to reach in outdoor environment. It enables the wireless LAN deployment to become more flexible and worry-free from the power outlet locations. Moreover, with the Planet Smart Discovery Utility, the WDAP-8350 is convenient to be configured remotely and with the Wireless Location Management, it is easy to locate online clients information.

 

 

Industrial-grade Wireless LAN

 

  • Compliant with IEEE 802.11n 2T2R MIMO with backward compatible with 802.11a/b/g standard
  • Simultaneous 2.4GHz and 5GHz wireless connectivity
  • Equipped with Gigabit LAN and 600Mbps wireless connectivity (Dual-N Band)
  • IPv4 and IPv6 dual-stack management networks


Radio and Outdoor Characteristics

 

  • Built-in 4 N-Type (Female) antenna connectors
  • High output power of up to 500mW with multiple adjustable transmit power control
  • Built-in surge arrester and ground terminal for protection against lightning strikes
  • IP66 aluminum case
  • IEEE 802.3at PoE design
  • Wide operating temperature of -40 ~ 70 degrees C


Wireless Characteristics

  • Dual-N band performs backhaul WDS link at 5GHz and relay wireless signal at 2.4GHz
  • Multiple wireless modes: AP, WDS PtP and WDS PtMP
  • Supports up to 16 multiple-SSIDs at each frequency band
  • Multicast rate adaptation guarantees wireless bandwidth and service quality
  • Automatic ACK timeout detection for long-range connection


Secure and Highly-reliable Network Management

 

  • Advanced 128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES) security, and 802.1x authentication
  • Supports IEEE 802.1Q tagged VLAN over WDS or mapping up to 32 SSIDs
  • Dual-image (dual-OS) backup mechanism
  • Easy Web-based UI and PLANET Smart Discovery supported
  • Telnet command line interface
  • Auto power saving mode reduces power consumption by 30%
  • Easily locate online clients information through the Wireless Location Management
  • System status monitoring includes statistics and associated client list

Hardware

  • Interface  Wireless: IEEE 802.11n concurrent 2.4GHz and 5GHz, 2T2R MIMO LAN: 10/100/1000BASE-T, auto-MDI/MDIX, IEEE 802.3at PoE PD
  • Antenna  Built-in 4 N-Type (female) antenna connectors with surge arrestor
    The outdoor antennas need to be purchased separately
  • Button/Connector  Reset button, ground terminal, ground lug
  • LED  PWR, LAN, 2.4G, 5G
  • Material  Aluminum
  • Dimensions (W x D x H)  220 x 95 x 220mm
  • Weight  2.34kg
  • Power Requirement  IEEE 802.3at PoE+
  • Power Consumption (max.)  < 24W (high-loading and heater)
    < 7W (power saving mode)
  • Mounting Type  Mast, wall mount

Wireless Interface Specifications

  • Wireless Standard  IEEE 802.11a/n 5GHz
    IEEE 802.11b/g/n 2.4GHz
  • Antenna Structure  802.11n: 2T2R MIMO at each frequency band
  • Data Rate  IEEE 802.11b: 1, 2, 5.5, 11Mbps
    IEEE 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
    IEEE 802.11n (20MHz): up to 150Mbps
    IEEE 802.11n (40MHz): up to 300Mbp at each frequency band
  • Media Access Control  CSMA/CA
  • Modulation Type  802.11a/g/n: OFDM (BPSK/QPSK/16QAM/64QAM)
    802.11b: DSSS (DBPSK/DQPSK/CCK)
  • Band Mode  2.4G and 5G concurrent mode
  • Frequency Range  2.4GHz: 2.400 ~ 2.484GHz
    5GHz: 5.150 ~ 5.850GHz
  • Operating Channel   2.4GHz
    America -- FCC: 1~11
    Europe -- ETSI: 1~135GHz
    America -- FCC:
    36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 (total 24 channels)Europe -- ETSI:
    36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (total 16 channels) 5GHz channel list may be vary in different countries and
    restricted to abide by regional regulatory compliance.
  • Channel Width  20MHz/40MHz
  • Max. RF Power  27dBm for all rate levels and modulation modes
  • Output Power Control  1 ~ 100%

Software Features

  • Wireless Mode   AP
     WDS PTP
     WDS PTMP
  • Wireless Encryption   WEP (64-/128-bit) encryption security
     WPA/WPA2 (TKIP/AES)
     WPA-PSK/WPA2-PSK (TKIP/AES)
     802.1x authentication
  • Wireless Advanced  Enable/Disable SSID broadcast
    Max. associated station number restriction
    Multiple SSIDs: up to 16 at 2.4GHz and 16 at 5GHz
    Supports multiple VLANs mapping to multiple SSIDs
    Supports fast roaming across APs
    Provides wireless statistics
  • Max. Wired Client  Unlimited
    Max. Wireless Client  Theoretical value: 127 at each band
    Recommended value: 50 at each band
  • Max. WDS Peers  Up to 16 at 2.4GHz and 16 at 5GHz
  • QoS  Supports multicast rate adaptation mechanism to guarantee the wireless bandwidth and service quality
  • LAN  Static IP, DHCP
    IPv4 and IPv6 dual-stack management network
    Supports 802.1Q tagged VLAN
  • System Management  Web-based (HTTP) and Telnet command line interface
    Supports NTP synchronization
    Easy firmware upgrade via HTTP/TFTP
    Easy system backup/restore via HTTP/TFTP
    Easily locate online clients information through the Wireless Location Management
    Supports Dual-OS auto-backup mechanism
    Supports Auto Power Saving Mode mechanism
    Supports PLANET Smart Discovery Utility
    Standards Conformance
  • Standard Compliance  IEEE 802.11n (2T2R, dual-N band up to 600Mbps)
    IEEE 802.11a
    IEEE 802.11g
    IEEE 802.11b
    IEEE 802.11i
    IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3ab 1000BASE-T
  • Other Protocols and Standards  CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP

Environment & Certification

  • Temperature  Operating: -40 ~ 70 degrees C
    Storage: -40 ~ 75 degrees C
  • Humidity  Operating: 10 ~ 95% (non-condensing)
    Storage: 5 ~ 95% (non-condensing)
  • IP Level  IP66
  • ESD Protection  ±15kV air-gap discharge
    ±8kV contact discharge
  • Surge Protection  ±6kV line to ground
    ±2kV line to line
  • MTBF  1553658 hrs at 25 degrees C
    335788 hrs at 60 degrees C
  • EMC Emissions Class  B
  • Regulatory Compliance  CE, FCC, RoHS